Short answer: Greenhouse installation labor ranges from well under $1 per square foot, when a farm crew assembles a simple poly house, to several times the material cost when a contractor builds a complex glass structure. Mississippi State Extension budgeted 90 labor hours at $16 an hour to assemble a 2,880 sq ft greenhouse. Contractor rates run about $50 to $100 an hour, and Prospiant notes installation can reach twice the material and equipment cost.
Key takeaways
- Installation cost depends mostly on who builds it: your own crew, a general contractor or a specialist greenhouse installer.
- A simple 2,880 sq ft poly house took about 90 labor hours in Mississippi State’s 2019 budget, roughly 6% of the total cost.
- Contractor labor is often quoted at $50–$100 an hour, plus electricians, plumbers and equipment hire.
- Site preparation, foundations, utilities and permits are usually priced separately from erecting the frame.
How much does greenhouse installation cost per square foot?
Greenhouse installation cost per square foot varies more than any other line in the budget, because labor rates and structure complexity both change it. In Mississippi State University Extension’s 2019 budget, assembly and installation of a 2,880 sq ft double-poly greenhouse was 90 hours at $16 an hour, or $1,448 (Mississippi State University Extension). By our arithmetic, that is about $0.50 per square foot and about 6% of the $24,770 total.
At the other end, Prospiant says it is common to see installation costs run as much as two times higher than the material and equipment costs alone (Prospiant, updated December 2025). That reflects contractor-built commercial projects with heavy equipment, tall structures and complex systems.
What labor rates do greenhouse installers charge?
Installers usually charge by the hour, by the day or as a fixed project price. Published US consumer cost guides give these typical rates:
| Trade | Typical rate | Source |
|---|---|---|
| Farm or in-house crew (assembly) | $16 per hour, 90 hours for 2,880 sq ft | MSU Extension, 2019 data |
| Landscape contractor (framing and glazing) | $50–$100 per hour | Fixr, 2022; Bob Vila, 2022 |
| Construction crew | $300–$500 per day ($150–$250 per person per day) | Bob Vila, 2022 |
| Handyman | $60–$90 per hour | Fixr, 2022 |
| Electrician | $40–$100 per hour | Fixr, 2022 |
| Plumber | $45–$200 per hour | Bob Vila, 2022 |
These rates come from residential cost guides (Fixr, August 2022; Bob Vila, July 2022). Commercial greenhouse installers often quote per project instead, and rates differ widely by country.

How do you estimate installation labor for your project?
The simplest estimate multiplies labor hours per square foot by your local hourly rate. MSU’s example works out to about 0.03 hours per square foot for a simple poly house (our arithmetic: 90 hours ÷ 2,880 sq ft).
As an illustration only, applying that same rate to one acre (43,560 sq ft) gives about 1,360 labor hours:
- At $16 an hour (farm crew): about $21,800.
- At $50 an hour (contractor, low end): about $68,000.
- At $100 an hour (contractor, high end): about $136,000.
Treat these as a floor for simple film houses. Tall gutter-connected structures, glass roofs, screens, heating pipes and controls take many more hours per square foot, and they need lifts or cranes.
What steps does greenhouse installation include?
Greenhouse installation is a sequence of trades, and each step has its own cost. The table shows who usually does what.
| Step | Main work | Usually done by |
|---|---|---|
| 1. Site preparation | Clearing, grading, compaction, drainage | Earthworks contractor |
| 2. Foundations | Footings or piers, anchor bolts, perimeter walls | Concrete contractor |
| 3. Frame erection | Columns, trusses, arches, gutters, bracing | Greenhouse crew with lifts |
| 4. Covering | Film, polycarbonate or glass, doors, vents | Greenhouse crew |
| 5. Systems | Fans, cooling pads, screens, heating, irrigation | Greenhouse crew plus mechanical trades |
| 6. Electrical and controls | Power supply, motors, sensors, controller | Licensed electrician |
| 7. Commissioning | Testing vents, screens, cooling and controls | Supplier and crew |
Does the structure type change installation cost?
Yes, the structure type changes installation cost because it changes how many parts are fitted, how high the crew works and what equipment is needed. The table compares common commercial structures in relative terms.
| Structure | Relative installation effort | Main reasons |
|---|---|---|
| Single-span film tunnel | Low | Few parts, low height, film fixed with lock channel and wire |
| Multi-span film greenhouse | Medium | Gutters, trusses and roof vents; lifts needed for gutter-height work |
| Polycarbonate greenhouse | Medium to high | Sheets cut and sealed to profiles; careful handling to avoid scratches |
| Glass Venlo greenhouse | High | Tall structure, many glass panes, glazing bars, roof vent mechanisms |
Systems add more time on top of the structure. Energy screens, heating pipe rails, fogging lines and climate sensors each need their own crew time and testing. For type-by-type cost context, see our article on single-span vs multi-span greenhouse costs.
What site and utility costs come on top of installation?
Site work and utilities are often quoted separately, and they can rival the erection labor. Plan for these items:
- Excavation and grading: Fixr puts flat-to-moderately sloped land at about $3 to $6 per square foot and hilly, overgrown land at $15 or more, at residential scale. Large sites priced by earthmoving contractors usually cost less per square foot.
- Foundations: MSU notes that concrete floors significantly increase costs. Most commercial houses use concrete footings with gravel or ground-cover floors.
- Utilities: MSU’s example budgeted $550 for electrical, gas and water hookup on a small house. Large projects need a transformer, gas line and water storage.
- Permits: Residential guides quote $100 to $600 (Bob Vila) or $450 to $600 (Fixr). Commercial projects may also need engineering approval.
Our guide on greenhouse site selection and land preparation covers what to check before grading starts.
Should you use your own crew or hire a contractor?
Using your own crew with supplier guidance usually costs the least, while a turnkey contractor costs more but carries the schedule risk. The right choice depends on project size and local labor.
- Own crew with factory guidance: Lowest labor cost. Works well for film and polycarbonate houses when the crew follows drawings and has a supervisor on site.
- Local general contractor: Good for foundations, utilities and permits. May lack experience with greenhouse frames and vents.
- Specialist greenhouse installer: Faster and more predictable on large or glass projects, at a higher rate.
Whichever route you choose, these steps usually lower the bill:
- Finish site work first: A level, drained, staked site lets the frame crew work without delays.
- Get anchor drawings early: Foundations poured to the supplier’s layout avoid re-drilling and refitting.
- Check deliveries: Count parts against the packing list before the crew arrives.
- Schedule around weather: Covering film or glazing in high wind is slow and risky.
The schedule matters as much as the rate. See our greenhouse construction timeline for typical phases.

What should buyers specify before requesting an installation quote?
Installation quotes are only comparable when the scope is the same. Ask every bidder to state:
- Scope: Which steps from the table above are included, and which are yours.
- Drawings: Whether foundation drawings, anchor layouts and assembly drawings are supplied before work starts.
- Equipment: Who provides lifts, cranes and scaffolding.
- Crew and supervision: Crew size, a named supervisor, and whether supplier engineers are on site.
- Schedule: Start date, duration, and weather allowance.
- Handover: Testing of vents, screens, cooling and controls, and the warranty start date.
How does FANGCHENG supply this?
FANGCHENG supplies greenhouses with installation support, either on-site with engineers or through remote guidance for the buyer’s own team. Each project comes with drawings and a material list designed for the local wind, snow, humidity and crop, and key components are produced in-house. FANGCHENG has worked on greenhouse planning, design, manufacturing and installation since 2002. Installation scope and cost are confirmed per project. See installation service for how support works.
Planning installation for a greenhouse project? Send your site location, planned area, structure type and the work your local crew can handle. FANGCHENG will recommend an installation plan with the quote.
Request a quote
FAQ
How much does greenhouse installation cost?
Greenhouse installation cost ranges from under $1 per square foot for a farm crew assembling a simple poly house to several times the material cost for a contractor-built glass house. Mississippi State Extension budgeted $1,448 to assemble a 2,880 sq ft greenhouse in 2019.
How long does it take to install a greenhouse?
Installing a small commercial greenhouse can take about 90 labor hours, based on Mississippi State’s 2,880 sq ft example. Large multi-span or glass projects take weeks to months, depending on crew size and weather.
What do greenhouse installers charge per hour?
Greenhouse installers usually charge about $50 to $100 per hour in US cost guides, with electricians at $40 to $100 and plumbers at $45 to $200. Commercial installers often quote a fixed project price instead.
Can my own team install a commercial greenhouse?
Yes, your own team can install many commercial greenhouses if it has assembly drawings and a trained supervisor. Film and polycarbonate houses suit this approach. Glass and very tall structures are usually better handled by experienced crews.
Is site preparation included in installation cost?
No, site preparation is usually not included in greenhouse installation cost. Grading, drainage, foundations and utility connections are typically priced separately.
Bottom line
Installation can be a small share of the budget or the largest line, depending on who builds the greenhouse and how complex it is. Get the scope in writing, price site work and utilities separately, and compare a supervised in-house crew against a contractor before you decide.
Editorial note: Labor data come from Mississippi State University Extension (2019 cost data), Prospiant (updated December 2025), Fixr (August 2022) and Bob Vila (July 2022). Per-square-foot and per-acre labor estimates are our own calculations. Sources retrieved November 2026. Labor rates vary by country and region.
Blog
Blog
Blog