...

Greenhouse Structures Built For Performance

Wiggle Wire, Lock Channel and Greenhouse Fasteners: The Complete Guide

Fasteners hold the covering on the frame. A greenhouse with good film and a poor fixing still loses the film in the first storm. FANGCHENG supplies lock channels, spring wire, clips, brackets, connectors and screws, matched to your frame and your covering.

A tunnel greenhouse with film torn loose in a stormWhere film lets go
Why it matters

Why film fails at the fixing

Most film failures start where the film is held. If tension is uneven, the film flaps and wears at the edge. If the fixing has sharp edges, it cuts the film. If the fixing lets go in wind, the whole sheet can lift. A good fixing holds evenly along the full length.

This guide explains how lock channel and spring wire work, which clip suits which job, how fixings fail, and how to buy them at volume.

How it works

How lock channel and spring wire work

Lock channel is a profile, usually aluminum, fixed to the frame.
The film is laid over it.
A spring wire is pressed into the channel, pinching the film in place.
The wire can be removed and refitted, so the film can be replaced or adjusted, and more than one layer can be held.
01/ 04Lock channel

Spring wire and its coating

Spring wire is steel wire shaped to snap into the channel. A coated wire is gentler on the film and resists rust. Choose the wire and channel to suit the film thickness and the wind exposure.

Wind and tension

Wind pulls on the covering all the time. Fixings have to keep the film or net tight without squeezing it so hard that it tears. Exposed sites need a continuous hold along the edge, while sheltered sites can use lighter clips.

Clips

Clips

Plastic clips are usually PP or PE, flexible with good UV resistance. Metal clips are galvanized or stainless steel, for strength and durability.

Spring wire clips
01 / 04

Spring wire clips

Used with aluminum lock channels on larger or more exposed structures.

Plastic snap clips
02 / 04

Plastic snap clips

Lightweight clips for round pipes, used for shade cloth and insect net.

Metal pipe clips
03 / 04

Metal pipe clips

Higher tension, for harsh climates or high-pressure areas.

Custom clips
04 / 04

Custom clips

Made for specific pipe diameters or special coverings.

Matching

Which fastener for which job

Film on a large or exposed frame
Shade cloth and insect net on round pipes
Harsh climates and heavy tension
Joining frame members
01/ 04Lock channel with spring wire.
Other fixings

Other fixings and accessories

Brackets and connecting plates

Join pipes and members of the frame.

Connectors

Join pipes and join frame to gutters, arches and columns.

Screws and bolts

Self-tapping screws for steel, matched to the channel.

Wire

Screen support wire, steel wire clips and trellis wire.

Film winders and strapping belts

Manual and electric winders for roll-up sides, and straps to hold film.

Mixing metals

When two different metals touch in damp conditions, one can corrode faster. Match screws, channels and brackets to the frame material, and keep coatings intact so the parts last together.

Installation tips

  • Clean the pipes before fitting
  • Handle plastic clips gently in cold weather
  • Keep spacing even
  • Inspect fixings every season, since tension changes

How to choose

  1. 01Covering type and thickness
  2. 02Frame shape and pipe diameter
  3. 03Wind exposure and UV exposure
  4. 04How often the covering is changed
  5. 05Whether you need to fix more than one layer
Diagnosis

Reading a failed fixing

Sign 01

Film pulled out of the channel

The wire does not suit the channel, the film is too thick for it or the tension is uneven.

Sign 02

Cracked plastic clip

Age and sun have made it brittle.

Sign 03

Rust streaks at a bolt

Coating damage or mixed metals.

Sign 04

Film cut at a clip

A sharp edge or too much pressure.

Buying fasteners

Buying fasteners at volume

We make clips and channels to standard or custom sizes, including OEM.Minimum order, lead time and price are confirmed when we quote.
Get a Free Sample
0 of 5 ready
FAQ

Common questions

Straight answers. If yours is not here, ask us.

Lock channel and spring wire suit larger or exposed structures and give a tight, continuous hold. Clips suit shade cloth, insect net and smaller structures.

Yes, if it is not bent or damaged. It can be removed and refitted when you replace the film.

Yes. Tell us the diameter and we confirm clips and channels that fit.

Yes. We offer a free sample and quote.

Usually the wire does not suit the channel, the film is too thick for it, or the tension is uneven. Send photos and we help.

Sometimes. Film usually needs a stronger hold. Tell us what you are fixing.

Galvanized, stainless and coated parts resist rust. Plastic clips do not rust but can age in strong sun.

Get started

Get fasteners matched to your greenhouse

Send your pipe size, covering and quantity. We reply within 24 hours.

Consultation and project proposals are free.

What to include

  • Pipe size
  • Covering
  • Quantity
  • Reply within 24 hours
Scroll to Top
Two people choosing plants inside a greenhouse
Greenhouse manufacturer in Guangzhou
  • We reply within 24 hours
  • Free consultation and project proposals
  • Free sample and quote
Contact us

Leave us your info

We are always happy to help you with any commercial greenhouse questions or requests you may have.

We use your details only to answer your inquiry.