Commercial Greenhouses, Built for Your Climate and Crop
The right commercial greenhouse depends on your climate, your crop and how much control you need. A film tunnel suits low-cost seasonal growing, a multi-span film greenhouse suits large commercial production, and glass or polycarbonate suits year-round, high-control projects. This page compares every type we build so you can narrow the choice before you talk to an engineer.
Built to your siteGreenhouses made to your site
FANGCHENG is a greenhouse manufacturer in Guangzhou. We design, fabricate and supply custom greenhouses for vegetables, tomatoes, flowers, seedlings, hydroponics and large agricultural projects, and we ship them with drawings and installation guidance.
Two ways to describe a greenhouse: structure and covering
-1536x691.jpg)

Buyers often mix up two separate choices. Most greenhouse types are a combination of the two, which is why the same covering can appear on very different frames.
Keeping the two apart makes quotations easier to compare. Two suppliers can both offer a "polycarbonate greenhouse" and mean very different buildings: one a light garden-scale frame, the other a gutter-connected structure designed for snow. Ask each supplier to name the structure and the covering separately, with the span, gutter height and covering thickness.
Greenhouse types by covering
01Film greenhousePolyethylene film over a galvanized steel frame. The lowest purchase cost and the quickest to build. Film is replaced every few years.
Explore
02Glass greenhouseHighest light and a very long service life, on a heavier structure. The usual choice for high-technology production.
Explore
03Polycarbonate greenhouseMulti-wall sheet that insulates well and resists impact. Suited to cold climates and hail.
Explore
04ETFE greenhouseA lightweight fluoropolymer film with very high light transmission. A premium option.
Explore
05Fiberglass (FRP) greenhouseCorrugated or flat panels that diffuse light. Lower cost, with a shorter life than glass.
Explore
06Aluminum greenhouseNamed for the frame, not the covering. Corrosion-resistant, usually glazed with glass or polycarbonate.
ExploreGreenhouse types by structure
01Single-span tunnelOne standalone arch. The simplest and cheapest, for small and medium farms and for a first greenhouse.
Explore
02High tunnel or hoop houseA tall, unheated tunnel for season extension, usually planted in the ground.
Explore
03Multi-span (gutter-connected)Several bays joined at the gutter under one roof system. Made for large, commercial, climate-controlled production.
Explore
04VenloA pitched, narrow-roof structure on gutters, built for glass and long-term, high-technology use.
Explore
05SawtoothA multi-span greenhouse with a raised roof vent that lets hot air out. Made for hot and humid regions.
Explore
06Light-deprivationA greenhouse with blackout curtains that control day length, used for photoperiod crops.
ExploreMatch the greenhouse to your situation
A single-span tunnel or a high tunnel. Low risk, quick to build, and a way to learn the crop under cover.
A multi-span film greenhouse, with room left to add bays and systems.
Glass or polycarbonate, often in a Venlo layout, with full climate control.
A sawtooth or a multi-span film house with strong roof ventilation.
Polycarbonate or glass on a frame designed for snow, with thermal screens and heating.
A light-deprivation greenhouse, with blackout curtains and ventilation planned for the dark period.
Insulation and a strong frame matter most. Polycarbonate or double-glazed glass, with thermal screens and heating. Film works with a second layer.
Getting heat and humidity out matters most. Sawtooth or multi-span film with roof vents, shading and cooling.
Light and cooling matter. Film or sheet with shading and evaporative cooling.
Impact resistance and a well-braced frame matter. Polycarbonate over a reinforced structure.
Most types work. Choose by crop and budget.
Robust and fast. Film or polycarbonate works well.
High light and tight control pay back. Glass, polycarbonate or a well-vented multi-span film house.
Film tunnels and multi-span houses, often with rain protection as the main benefit.
Even light and stable temperatures. Polycarbonate, glass or ETFE.
Stable conditions and good diffused light. Film, polycarbonate or fiberglass.
A light-deprivation greenhouse with blackout curtains.
Free-standing or gutter-connected?
A simple test is to count how many separate houses you would need.
-1536x1152.jpg)

A free-standing greenhouse stands alone, so you can add one at a time.
A gutter-connected greenhouse joins many bays into one continuous space.
If the answer is one or two, free-standing keeps things simple.
If it is many, the walls, doors and gables repeated on every house start to cost more than the gutters that would join them, and a connected layout becomes the better use of money.
Tap a side to compare.
The joined layout uses land better, makes heating, cooling and screens easier to run as one system and cuts the walkways between houses. The trade-off is that the whole area shares one climate, so you cannot hold different conditions in different parts unless you add curtains or partitions, and pests can spread more easily inside an open layout.
How to choose: six questions
What is your climate?
Cold and snowy, hot and humid, dry, windy or hail-prone. This one decides the covering and the structure more than anything else.
What are you growing?
A crop that needs strong light and tight control points to glass or polycarbonate. A seasonal or robust crop can do well under film.
What scale do you need?
Under a few hundred square meters, a tunnel is practical. Large commercial areas favor multi-span.
What is your budget, and over how many years?
Purchase cost and service life pull in opposite directions. Compare the cost per year, not only the price.
How much control do you want?
Heating, cooling, screens and automation are easier to fit on a gutter-connected structure.
Will you expand?
Free-standing tunnels and multi-span bays can both be extended if you plan for it at the start.
Film ages in cyclesService life: how long each part lasts
A greenhouse ages in parts, not all at once. The hot-dip galvanized steel frame is the long-lived part. Film coverings are replaced on a cycle of a few years, while glass, polycarbonate and ETFE last much longer. Moving parts such as vent motors, roll-up gear and curtain drives are serviced on their own schedule.
Planning for this changes the comparison. A film house is cheap to buy but carries a re-cover in its running costs. A rigid covering costs more on day one but removes that item. Both can be right, as long as the budget counts the whole life.
What decides the price of a commercial greenhouse
The covering
film, sheet, glass and ETFE sit at very different price levels
The structure
span, height and the steel it takes to carry local wind and snow
The systems
ventilation, cooling, heating, shading, irrigation and controls
The site
foundations, ground conditions and access
Logistics
shipping, import duties and installation
We give a quotation per project, because these items change from site to site. Send us your location, crop and area and we reply within 24 hours.
Two projects of the same area can differ widely in price because of loads alone. A site with heavy snow needs closer columns, heavier trusses and larger foundations than a mild site, even if the two greenhouses look alike. That is why a price per square meter quoted without a location is only a rough guide.
Size and scale
A grower with a few hundred square meters can start with a single-span tunnel and learn the crop. A farm planning several hectares should plan for multi-span bays, shared systems and central control from the start. Mixed projects often begin with a tunnel and later add a multi-span range. If you expect to grow, tell us now so the layout can leave room.
Steel structure on siteA greenhouse is a structure plus systems
The frame and covering are only the shell. A working greenhouse also needs ventilation, cooling or heating, shading, irrigation and a way to control them. We supply the structure together with these systems, so they are designed to fit each other instead of being assembled from several suppliers.
The links between the parts are where single-supplier design pays off. Screens need room above the crop and a frame that can carry their drives. Vents need an opening area matched to the volume of air inside, and fans and pads need end walls built for them. When these are drawn together, nothing has to be cut or added on site.
How a project works with FANGCHENG
Brief
You tell us the site, crop, area and budget.
Design
We prepare layouts and structural calculations for your local wind and snow.
Manufacture
Steel is fabricated and hot-dip galvanized in our factory, ready for bolted assembly.
Pack and ship
Parts are labeled and packed for export.
Install
Your team builds from drawings, with our technical guidance.
Buying from a greenhouse manufacturer: what to ask
Common mistakes when choosing a greenhouse
Choosing a covering on price alone and ignoring service life
Choosing a tunnel for a crop that needs tight climate control
Copying a design from a different climate
Buying the structure first and planning ventilation later
Leaving no room for expansion
Structure only, or a turnkey greenhouse?
-1024x461.jpg)
Structure only
Frame, covering, vents and doors. Suits growers who already have system suppliers or an in-house team.

Structure plus key systems
Adds shading, cooling, heating or irrigation, designed into the frame.

Turnkey
A complete greenhouse with climate control, irrigation and automation, designed and supplied together.
We can quote each level, so you can see exactly what the extra scope adds.
What to prepare before you ask for a quotation
You do not need all of these on day one. Send what you have and our engineers ask for the rest.
Common questions
Straight answers. If yours is not here, ask us.
A film tunnel has the lowest purchase cost. Over a long period, a more durable covering can cost less per year. Tell us your site and we compare options.
A high tunnel is a tall, unheated structure used to extend the season, usually with crops planted in the ground. A greenhouse is built for more climate control, with heating, cooling and automation.
Yes. Span, height, length, bay distance and covering are customized for each project.
Yes. We provide drawings and technical guidance, and your team installs.
Yes. Parts are packed for export. Tell us your destination.
Send your location, crop and planned area. We reply within 24 hours with suggested types.
Yes. A common pattern is a multi-span house for the main crop and a few tunnels for seedlings or seasonal crops.
Polycarbonate or double-glazed glass on a frame designed for snow, with thermal screens and heating. Film can work with a second layer and heating when the budget is tight.
A sawtooth or a multi-span film house with large roof vents, shading and, where needed, pad and fan cooling.
Tell us about your project
Send your location, crop and area. Our engineers reply within 24 hours.
Consultation and project proposals are free.
What to include
- Location
- Your crop
- Planned area
- Reply within 24 hours
